Electronics Line infinite prime, Installation Manual

Page: 43 / 113

-43-
6.3.2: SMS Command Format
Each SMS command contains the following elements:
™
SMS Command Descriptor (up to 43 characters of free text)
š # (delimiter – separates the descriptor from the actual command)
› User Code (4 digits)
œ Command (0=Off, 1=On)
 Device Number (HA Units: 01-16, or 30 for PGM output)
The following example shows the format of an SMS command to switch on a water boiler
controlled by HA unit 8.
™ š › œ 
B O I L E R O N # 1 2 3 4 1 0 8
,
While the SMS Command Descriptor is optional, you must start the SMS command with
the # symbol for the system to accept the command.
6.3.3: SMS Confirmation Message Format
After an SMS command is executed, the system can return a confirmation SMS
message to the sender. This message includes the descriptor of the HA unit or PGM and
the command that was sent. For further information on how to enable this feature,
see
10.7.5: SMS Confirmation.
The following example shows the confirmation message the sender receives for the
sample command from the previous section.
B O I L E R - O N
6.4: Scheduling (not relevant to PGM)
Scheduling allows you to program the control system to send On/Off commands to
HA units at specific times. You can also program the days of the week that the
schedule is active.
6.4.1: On Time
To edit an HA unit’s “On” Time:
1. From the main menu, select HA Schedules [8].
2. Select an HA unit.
3. From the X10 unit’s sub-menu, select On Time [#1].
4. Enter a time (HH:MM).
5. Press
when the desired setting is displayed.
6.4.2: Off Time
To edit an HA unit’s “Off” Time:
1. From the main menu, select HA Schedules [8].
2. Select an HA unit.
3. From the HA unit’s sub-menu, select Off Time [#2].
4. Enter a time (HH:MM).
5. Press
when the desired setting is displayed.