Electronics Line Commpact, Installation Manual

Page: 22 / 160

Hata! Burada görünmesini istedi ğ iniz metne Heading 1 uygulamak için Giri ş sekmesini kullan ı n. Hata! Burada
görünmesini istedi ğ iniz metne Heading 1 uygulamak için Giri ş sekmesini kullan ı n.
CommPact Installation Manual
18
Below you can see another, more complicated example of how can the premises be divided. In this
example, the garage is included in full + part + perimeter arming, the house perimeter zones are
included in full + perimeter arming, and the house interior zones, in full arming only. So, part
arming allows the user to arm the garage, perimeter arming is used to secure the house perimeter at
nights, and the full arming is used when leaving the house. Figure 3 ‐ 5 illustrates this example. In
each diagram, the protected area is shaded.
Full armed Part armed Perimeter armed
Figure 3-5: Arming Modes: Garage Example.
3.6.2. Arming Keys
The Arming keys enable you to arm the system using any of the three arming methods: ‐‐ Full, Part
and Perimeter.
Front Panel Wireless Keypad EL-2620
Figure 3-6: Arming Keys
3.6.3. Full Arming
Full arming is designed for when the occupant vacates the premises.
To fully arm the system using the front panel keypad or Wireless Keypad:
1. Check if the system is ready to arm.
2. Press the Full arming key on the keypad.
3. If One ‐ Key Arming is disabled, enter your user code.
3.6.4. Part Arming
Part arming is designed for when the occupant intends to remain inside one part of the premises
and secure another part.
To partially arm the system using the front panel keypad or Wireless Keypad:
1. Check if the system is ready to arm.
2. Press the Part arming key on the keypad.
3. If One ‐ Key Arming is disabled, enter your user code.