Electronics Line Commpact, Installation Manual

Page: 79 / 160

Hata! Burada görünmesini istedi ğ iniz metne Heading 1 uygulamak için Giri ş sekmesini kullan ı n. Hata! Burada
görünmesini istedi ğ iniz metne Heading 1 uygulamak için Giri ş sekmesini kullan ı n.
CommPact Installation Manual
75
10.9.3. Two-Way Audio
For Burglary, Fire and Medical event groups, there is an additional option that enables Two ‐ Way
Audio for that event group – see p. 36, 5.2.2 TWA Alarm Reporting.
To enable/disable Two ‐ Way Audio for an event group:
1. From the Programming menu, select Communications, Event Options [955].
2. Select an Event Group (Burglary, Fire or Medical).
3. Select TWA [#3].
4. Select Enabled or Disabled.
10.10. Vocal Message Dialer Event Options
Events reported using the Vocal Message Dialer is divided into event groups that correspond with
the pre ‐ recorded event messages. This allows you to enable or disable the Vocal Message feature
for a specific group of events. For further information on this feature, see p. 63, 10.3 Vocal Message
Dialer.
The vocal message event groups and their associated system events are as follows:

Burglary [#1]
o
Alarm from Zone (excluding Gas and Environmental zones)
o
Zone Tamper
o
Tamper
o
Duress

Fire [#2]
o
Zone Fire Alarm
o
User Activated Fire Alarm

Panic [#3]
o
Zone Panic Alarm
o
User Activated Panic Alarm

Medical [#4]
o
Zone Medical Alarm
o
Zone Medical Alarm
o
User Activated Alarm
o
No Motion

System Trouble [#5]
o
Battery Low
o
Transmitter Low Battery
o
AC Loss
o
Media Loss
o
Device Trouble
o
Communication Trouble
o
Transmitter Out of Synch.
o
Control System Transmitter Out of Synch.