3
Master Code
The Master Code has the authorization to
enter Programming Mode. When the
display panel asks you to key in
M-Code
,
please enter your Master Code.
Master Code:
Factory default:
1111
1.6. Getting Started
<
<
I
I
M
M
P
P
O
O
R
R
T
T
A
A
N
N
T
T
N
N
O
O
T
T
E
E
>
>
The Control Panel has
Screen Saver
feature. The
Alarm on / off
message
will be displayed for 180 secs. Then,
only the current date & time will be
displayed.
While entering PIN code, if incorrect
codes have been inputed for 4 times
or over 20 incorrect numeric numbers
have been entered, it will inhibit
further key presses for 1 minute.
Press
key will clear the code field,
or return to the previous screen.
After any changes are made in
settings, you must return to Alarm off
mode in order to save the changes. If
not returned to Alarm off mode or if AC
power & battery are both off, then the
changes will not be saved.
Step 1.
Find a suitable location for the Control
Panel to be installed.
Step 2.
Apply the AC Power. You will hear
one long beep.
Alarm On
will be
displayed on the first line and
00:01
01 Jan
displayed on the second line
of the screen indicating the system is
in Away mode (factory default).
Step 3.
Key-in your 4 digits User 1 PIN Code
within 30 sec.
Step 4.
Press
OK
. You will hear 2 short beeps
and the display will show.
A l a r m O f f
0 0 : 0 1 J a n 0 1
The system is now in Alarm off mode.
<
<
N
N
O
O
T
T
E
E
>
>
Whenever the Control Panel is
powered on again, it will resume the
mode
before
the
power
is
off/disconnected.
OK
key confirming the entered PIN
code should be pressed within 30 sec.
Otherwise, the display will go back to
Alarm On
and the system remains
armed, the display will go back to the
previous mode.
In Step3, if you press a key other than
numeric keys, the display will remain
the same requesting you to key in
1234
(default PIN code) and then
press
OK.