20
20
EN
EPIR2 User Manual v.1.4
1.14. Receiving an SMS/text message when temperature exceeds the set values
The system comes equipped with a feature intended for temperature measurement in the
surrounding area. This feature allows to monitor the temperature and receive a notification by
SMS text message, identified as the Temperature Info SMS, to user phone number when the set
temperature MIN or MAX boundaries are exceeded. For this purpose you may use the system’s
built-in temperature sensor or one of the temperature sensors incorporated in the wireless
device (if any). The following wireless devices contain a built-in temperature sensor:
ATTENTION:
The supported temperature range is -10... +40 °C.
• EWP1 - wireless PIR sensors (motion detectors);
• EWS1 & EWS2 - internal and external sirens;
• EWF1 – wireless smoke detectors;
• EW1 - wireless zone and PGM output expansion module;
• EW1B - battery-powered wireless zone and PGM output expansion module.
By default, temperature measurement feature is disabled. To enable it, please refer to
ELDES
Configuration Tool
software. To set the MIN and MAX temperature boundaries, please refer to
section 3 or
ELDES Configuration Tool
software.
1.15. Additional capabilities
You can also use your mobile to request information about the system, the power supply and
the network quality. Plus you can listen in to what’s happening in the secured location through a
remote microphone. See section 3 for more details.
EPIR2 system comes equipped with built-in wireless module allowing to enhance your securi-
ty system with the addition ELDES wireless PIRs (Passive Infrared Sensors), sirens, magnetic
door and window sensors or expansion modules. See section 2 for more details.
2. HOW TO MANAGE THE WIRELESS DEVICES
IMPORTANT:
Before you continue, first follow the entire section
1. QUICK START
and
prepare the system for use as described.
OVERVIEW
Your EPIR2 has a built-in wireless module. This section tells you how to bind and remove a wireless
device using your PC and
ELDES Configuration Tool
as well as briefly describing every available
wireless device which can operate together with your EPIR2 system.
It is possible to connect up to 16 wireless devices to the EPIR2 system. This includes the following:
• EWP1 - wireless PIR sensors (motion detectors);
• EWD1 - magnetic door contacts;
• EWS1 & EWS2 - internal and external sirens;
• EWK1 & EWK2 - wireless keyfobs to arm and disarm the system without using a mobile
phone;
• EKB3W – wireless keypads to arm,disarm and configure the system without using a mobilephone;
• EWF1 – wireless smoke detectors;
• EW1 - wireless zone and PGM output expansion module;
• EW1B - battery-powered wireless zone and PGM output expansion module.
Summary of Contents for EPIR2
Page 1: ...EPIR2GSM Alarm System ...
Page 61: ...61 61 EPIR2 User Manual v 1 4 ...
Page 62: ...62 62 EN EPIR2 User Manual v 1 4 ...
Page 63: ...63 63 EPIR2 User Manual v 1 4 ...
