Eldes EPIR2, Manual

Page: 5 / 64

55
EPIR2 User Manual v.1.4
Protecting your home and property with the EPIR2 alarm system
Where and how to use the alarm system
The EPIR2 is a convenient, easy to use, remote control security system for houses, cottages, coun-
try homes, garages and other buildings.
It uses an internal SIM card (not supplied by ELDES) and an infra red sensor, and communicates
with your mobile phone so you can:
• Protect your property while you are away from home
• Listen to what is happening in your property following a security alert
• Switch the system on or off from anywhere in the world at no cost
• Receive SMS/text messages updating you on the system status
• Include up to ten users to receive system status messages and/or security alerts
• Receive SMS/text messages updating you on the temperature of the surrounding area
In addition, the EPIR2 system has a built-in wireless module for system extension capabilities.The
wireless module easily allows you to bind ELDES-made wireless devices to the system. For more
details, please, refer to section 2. HOW TO MANAGE THE WIRELESS DEVICES .
IMPORTANT Please read the user manual before operating the system. The user manual will
show you how to install and operate the EPIR2 alarm security system safely and easily. You’ll
find a quick start guide in section 1. To learn how to take advantage of additional functions,
see sections 2, 3 and 4.
Technical Specifications
Supply voltage .........................................................11-15V 500mA max
Supported back-up battery....................................8.4V 250mAh rechargeable Ni-Mh 6HR61
(IEC)/7.2H5 (ANSI/NEDA)
GSM modem frequency ..........................................850/900/1800/1900 Mhz
Dimensions ..............................................................104x60x33mm
Operating temperature range...............................-10…+40 °C
Humidity ...................................................................0-90% RH @ 0... +40 °C (non-condensing)
Back-up battery operating time ...........................up to 24 hours*
Detection angle .......................................................90°
Maximum motion detection range .......................10 metres
Wireless transmitter-receiver frequency ...........868 Mhz
Wireless communication range ............................up to 30m in premises; up to 150m in open areas
Maximum number of wireless devices ................16
Communications .....................................................SMS, Voice Calls, GPRS Network
Supported protocols ...............................................Ademco Contact ID®, EGR100, Kronos, Cortex® SMS
BELL+: siren output commuted values ...............Current - 150mA max.; voltage - 15V (EPIR2 on
external power supply) /8V (EPIR2 on backup battery)
* - with Smart Security disabled; with wireless transmitter-receiver module disabled