Eldes EPIR2, Manual

Page: 42 / 64

42 42 EN
EPIR2 User Manual v.1.4
Wireless Device Management
Function Command Value Range / Comment Example
Disable wireless
module
XXXX_RF:OFF The system disables the
built-in wireless module
1111_RF:OFF
Enable wireless
module
XXXX_RF:ON 1111_RF:ON
Bind a wireless
device to the
system
XXXX_SET:YYYYYYYY YYYYYYYY = 8-character
wireless device ID code
1111_
SET:5261841A
Remove a wire-
less device from
the system
XXXX_DEL:YYYYYYYY YYYYYYYY = 8-character
wireless device ID code
1111_
DEL:5261841A
Replace a wireless
device by another
wireless device of
the same model
1111_REP:YYYYYY
<ZZZZZZZZ
YYYYYYYY = old 8-char-
acter wireless device ID
code; ZZZZZZZZ = new
8-character wireless
device ID code
1111_
REP:5261841A
<41286652
Verify free wire-
less channels
XXXX_STATUS_FREE The system will send you
a text by return, with the
number of available free
wireless channels.
1111_STATUS_FREE
Get wireless de-
vice information
XXXX_RFINFO:Zn
or XXXX_RFINFO:
YYYYYYYY
Zn = [Z3... Z34]
The system will send you
a text by return, with the
following information:
• wireless device battery
level;
• wireless signal level;
• error rate (number of
failed data transmis-
sion attempts in a
10-minute period);
• firmware version.
1111_
RFINFO:5261841A
Verify wireless
device operation
status
XXXX_TEST:Zn Zn = [Z3... Z34]
The system will send you
a text by return indicating
if a wireless device is
operational.
1111_TEST:Z6
Get wireless de-
vice temperature
XXXX_TEMP:Zn Zn = [Z3... Z34]
The system will send you
a text by return indicating
temperature value
measured by a built-in
temperature sensor (if
any) of a specified wire-
less device.
1111_TEMP:Z9
NOTE: The underscore symbol ‘_’ in these instructions represents a space. So when typing an
SMS/text message, replace the underscore symbol with a single space.