ELCOM Uniq 150, Service Manual, Page: 17 / 41

26
Elcom, spoločnosť s ručením obmedzeným, Prešov Elcom, spoločnosť s ručením obmedzeným, Prešov
27
Uniq 150 Service manual Service manual Uniq 150
a. Cable with connectors split in half and insulate wire ends. Only one half of the cable will be used.
b. Slit tubings on the cable wires and solder it to the reader cable.
c. Cover soldering with tubing and shrink it with hot air.
5. Adjusted reader cable connect to mainboard, connector USB01 (N270) or USB2 (D525).
6. Fix reader holder on Uniq 150 with screws M2,5 × 10 mm DIN965 after covers are closed and side profile
is sticked.
7. Fix reader to reader holder with screws 3 × 8 mm BN82427. Reader cable must be tucked completly
inside!
Figure 2.10.1. – MS reader installation – strips
ø4
ø4
102
ø4
ø4
102
Tx components adjustment Nx components adjustment
Fr
on
t c
ov
er str
ip - lef
t
Fr
on
t c
ov
er str
ip - r
igh
t
MS r
eader holder
MS r
eader holder
cca 210
ø2,5
ø4
cca 320
ø2,5
ø4
Side profile (gum)
Figure 2.10.2. – MS reader installation
Tx components adjustment Nx components adjustment
MS reader
MS reader holder
Screw M2,5 × 10 mm DIN965
Screw 3 × 8 mm BN82427
Figure 2.10.3. – Alternatíves of MS reader interconnection
1
MS
reader
MS
reader
1
red
white
green
black
red
white
green
black
Needed to order Quantity Ord. code
Tubing 1,6 × 10 mm 4 M010003
Screw M2,5 × 10 mm DIN965 conical 3/4 * M250207
Screw 3 × 8 mm BN82427 conical 2 M250208
Magnetic stripe reader 1 M310028
MS reader holder 1 M051066
Cable 8-wires 250 mm 28 AWG 2H 1 ** M200143