ELCOM POS-4000, User Manual

Page: 32 / 68

POS–4000 © Elcom, s. r. o.
32
POS programming
Action description POS POS keyboard PC keyboard
press the PLU items
button
until the
PLU items icon is se-
lected, then press
until
the PLU items icon is
selected, then press
Flag descriptions:
• Name – Article name. This description will be printed onto
the receipt.
• PLU – PLU code. The EAN bar-code will appear here. Bar-
codes can be entered manually or using the bar-code
scanner.
• Price – Article price. It is entered in the master currency, set
in the Currency group. Up to ten-digit number or up
to specified Halo (see below).
• Stock – Current stock.
• Department – Assign the department to the article using the pull-
down menu. Departments are programmed in the
Departments group.
• Tax – Assign the tax level to the article using the pull-down
menu. Selected tax will be charged to the article. Tax
levels are programmed in the Taxes group.
• Sale – Can prohibit sale or specify the manner of entering
the price during sale (entry via keyboard (open),
preprogrammed price only (preset) or both).
• Units – Assign the sale unit to the article using the pull-down
menu. The sale units are programmed in the Units
group.
• Descriptive – PLU without price, it is only a descriptive name.
• No fraction – Forbids selling a fraction from this article if checked.
• Neg. stock – Allows negative stock values if checked.
• Single – This PLU will automatically finish the sale.
• Package – This PLU is designated as returnable packaging for
reports.
• Customer discount – Value discount per piece can be applied to this PLU.
• Halo – The maximum number of digits while entering the
price using the keyboard. This number concerns only
the digits to the left of the decimal separator. This
Figure 3.7 >
PLU record programming
dialogue. After pressing the
New or Edit buttons the
inactive elements are acti-
vated and the bottom but-
ton bar changes as shown
in the underlying picture.