ELCOM POS-4000, User Manual

Page: 30 / 68

POS–4000 © Elcom, s. r. o.
30
POS programming
Message after the break – The message that will be printed after printing
interruption itself. Overwriting the row changes the
message.
Paper type – three types of paper are available. Producer of paper
is also displayed after the paper type is selected. This
option must be changed every time the paper type
is changed. After the Master Reset was performed
default value is „non-defined“.
After the programming is finished, check thoroughly the correctness of entered values. Ac-
cidental errors can still be corrected. The group dialogue is exited by pressing the OK (OK
Enter).
Movement of goods group
The non-fiscal movements of goods are defined and classified in this group. These records
can assist stock management, ordering, etc. A descriptor is entered that describes a type of
entry—for example the name of a supplying wholesaler where after a delivery you add stock.
Action description POS POS keyboard PC keyboard
log in (you have to be
authorised to enter pro-
gramming mode)
press the Programming
button
until the
Programming icon is
selected, then press
until the
Programming icon is
selected, then press
press the Movement
of goods button
until the
Movement of goods
icon is selected, then
press
until
the Movement of goods
icon is selected, then
press
Flag descriptions
• Number
– The movement key in form of two numerals, is
selected from a range of valid values (00–20)
• Name – The label for the given movement; 20 characters
maximum
• Type – Sets the type of movement: ‘+’ adds to stock, ‘–’
subtracts from stock
• Change stock – This check box specifies if the actual stock values
change when the movement is performed
Figure 3.6 >
Movement of goods group
dialogue