Euro 500TE Handy
© Elcom, s. r. o.
44
Operations in registration mode
essed cheese) at the price of 15.60. The custom-
er buys only three pieces.
Successive multiplication PLU
registration
The cash register can be programmed for suc-
cessive price multiplication. The function is
enabled by setting the system flag No. 2, digit
6 to 1.
Example: The price is determined for the
square meter. Your customer buys 3 by 5 square
metres.
Proc. cheese
[
3/5*15.60 =9.40
Step
Press
1.
3
a
2.
5
a
3.
2
c
Linen [
3*5*64.30
=964.50
Step
Press
1.
3
a
2.
5
a
3.
27
c
Other registrations
Registration with mandatory
customer number
Sale assigned to a customer is very important
maily in situations when the ECR owner wish-
es to send the stored PC sale data to the PC and
process them further. Processing of the data is
determined by the PC application that idden-
tifies the customer and processes the data. To
enable mandatory assignment of the customer
to a sale, set the second electronic journal flag,
digit no. 2 to value 1. This configures the ECR
so, that it’s not possible to start a sale without
assigning a customer first. You can enter the
customer number by typing his/her number
(of maximum eight digits) and pressing the
(
Drawer
) key. Then you can continue sale as
usual. You can also assign the customer number
to a sale even if second electronic journal flag
isn’t set to one.
Example: Sale for the customer no. 312058.
Registration using a bar-code
• Registration by a bar-code scanner
A bar-code scanner can be connected to the
cash register. Information is then registered
simply by scanning the bar code. The RS-232
parameters of the bar-code scanner and the
cash register have to be set to the same values
(5th system flag PLU bar code programming).
Example: Customer buys three pieces of butter
that has a bar-code on its pack.
• Registration by a bar-code entered via the
keyboard
CUSTOMER NUMBER
312058
Proc. cheese
[
15.60
=15.60
Step
Press
1.
312058J
2.
1
c
3.
2
c
4.
D
5.
E
Proc. cheese
[
3/5*15.60
=9.40
Step
Press
1.
3
a
2.
scan the bar-code using scanner
