Omron H7GP - User Manual Download

Page: 1 / 20

Total Counter/Time Counter

H7GP/H7HP

Total Counter/Time Counter

H7GP/H7HP

Please read and understand this catalog before purchasing the products. Please consult your OMRON representative if you have any questions
or comments. Refer to

Warranty and Application Considerations

(page 20), and

Safety Precautions

(page 15).

High-visibility, IP66/NEMA4 Protection Total Counter/Time Counter Range

• IP66 (JEM standard IP66G: oil resistance) and NEMA4 protection standards.

• Switch between NPN and PNP operation.

• Both external and manual resets provided.

• Finger-protection terminal block cover prevents electrical shocks conforming to VDE0106/100.

• Conforms to EMC standards (EN61326).

• Conforms to IEC standards, and approved by UL and CSA.

• Wide power supply range.

• Six-language instruction manual provided.

Contents

Total Counter/Time Counter

H7GP ..............................................................................

H7HP ..............................................................................

Common to Both Counters

Input Connections...........................................................

Safety Precautions..........................................................

Degree of Protection .......................................................

P Series

•

6-digit total counter

•

6-digit time counter

•

DIN 48 x 24

•

6-digit total counter/time counter

•

8-digit total counter

•

DIN 72 x 36

H7HP

H7GP

Summary of Contents for H7GP -





















Search results

Summary of Contents for H7GP -

Reviews:

Related manuals for H7GP -

Brands by name

Popular brands

Omron H7GP -, Datasheet

Search results

Summary of Contents for H7GP -

Reviews:

Related manuals for H7GP -

Brands by name

Popular brands