Euro 500TE Handy
© Elcom, s. r. o.
68
Optional accessories
opening. The small cable with the connector
permits you to disconnect the drawer for more
comfortable carrying. This function is advanta-
geous for very small businesses where you can
put the drawer in any place without losing the
Digital scales
The ECR type Euro-500TE Handy allows to
connect different types of digital scales. The
standard facility of the scales is a serial interface
used for the certain communication with Euro-
500TE Handy. The scales are usable also with-
out connection to ECR. The scales are supplied
with legal certificate and with communication
cable on demand.
Ask the supply and connection of the scales
from your authorised dealer of Euro-500TE
Handy.
Bar-code scanners
ability for the cash register to open it automati-
cally. It is possible to open the cash drawer only
using power adapter supply.
Ask for the cash drawer from your authorized
dealer of the Euro-500TE Handy.
Figure
7.3
>>
Digital scales.
The Euro-500TE Handy cash register is
equipped with an interface for the bar-code
scanner connection. If you would like to use a
bar-code scanner, this section will try to advise
you which scanner to choose. It is recommend-
ed that you consult with your authorised dealer
on the purchase of a scanner and connectivity
with the cash register.
The scanner is connected to the cash register by
means of a built-in RS-232 serial interface with
the standard modular jack 6×6 male connec-
tor. Thus, the bar-code scanner must also be
equipped with the same interface and connec-
tor. The cash register pr5 V for power
supply to the scanner. Before connecting, it is
necessary to program both the scanner and the
cash register with equal communication pa-
rameters.
Metrologic scanners are recommended for use
with the Euro-500TE Handy cash registers. For
other information, ask your local dealer. The
price of the scanner is lower if it is sold with the
Euro-500TE Handy cash register.
Metrologic MS-951
Laser, hand held and on holder use, the line
system of scanning, RS-232 interface (model
951R), speed of scanning 36 lines per second,
the scanning distance up to 205 mm, automatic
activation, easy programming, low cost, sup-
ply +5 V, scanner holder included in a price of
scanner.
Metrologic Orbit MS-7100
Light-weight stand scanner, the higher class
of scanner, concentrated omnidirectional sys-
tem of scanning, flexible manipulation, adjust-
able holder, easy programming, low cost, sup-
ply +5 V, scanning speed 1,200 lines per second,
maximum scanning distance 215 mm.
Figure
7.4
>>
Metrologic MS-951 bar-
code scanner.
