Euro 500TE Handy
© Elcom, s. r. o.
71
Helpful advice
Helpful advice
Information and error messages
If it is necessary to inform the operator on the
current status of the ECR, or the ECR enters
an error state, the error messages shown in ta-
ble 8.1 are displayed.
Message
Meaning
100%
No external power supply is connected. The power supply is in-
ternal accumulator. The percentage value indicates the stage of
internal accumulator charge.
ADD ON
DISCOUNT LIMIT
OVER
Add on or discount amount limit over. Check the system flags.
ADD ON
DISCOUNT
TO NEGATIVE VALUE
Add on or discount to negative amount disabled.
ADD ON
DISCOUNT
TO RETURNABLE PACKS
Add on or discount to returnable packs disabled.
AMOUNT DUE
Information about amount that has to be paid for sale termina-
tion.
BAD FORMAT EAN CODE 13 FOR
Bar-code doesn‘t conform to the EAN-13 standard regarding its
checksums.
BAR CODE DUPLICATE
Bar code is assigned to another PLU.
CARD NOT ACCEPTED
Credit card not accepted during EFT terminal payment.
CODE SORTING
ECR sorts programmed bar codes.
COMMUNICATION ERROR
Communication error between ECR and PC or EFT terminal.
CONTINUE ON SALE
ECR is ready to continue on sale.
CREDIT CARD PAYMENT LIMIT
OVER
Credit card payment limit is over.
DATE ERROR
Incorrect date entry.
DATE REVERSE ORDER
Incorrect date entry.
DECIMAL PLACES
LIMIT OVER
Second system flag disables sale for more decimal place.
DPT INACTIVE
Sale through this DPT is forbidden.
DUPLICATE PRINT
The printing of duplicate of last receipt.
ECR -- PC
The communication between ECR and PC running.
ECR AFTER REPORT
No sale from daily (total) report execution.
ENTER DOCUMENT NUMBER
It’s mandatory to specify a customer. Enter 8-digit customer
number.
ENTER SERVICE CODE
Unblocking programming mode can be done only by entry of
service code.
ENTER THE AMOUNT
OF CUSTOMER CASH
Enforced entry of customer cash before sale termination.
ENTRY ERROR
Unexpected entry. Incorrect sequence of keys pressed.
FINISH PURCHASE
Maximum count of PLU in a sale has been reached (50), or max-
imum count of lines in one receipt has been reached.
FLAG ERROR
Incorrect flag entry.
FORBIDDEN ENTRY
OF RETURNABLE PACKS
Operation of bottles not can be performed.
GT LIMIT OVER
EXECUTE REPORTS
Grandtotals reached the maximum amount. Execute daily (total)
and periodical report. Call your service technician.
GT NEGATIVE VALUE
Performed operation caused negative Grandtotal.
HEAD OVERHEAT
Information on the thermal head overheat. Wait a moment until
normal condition returns.
Message
Meaning
HEAD UP POSITION
The thermal head is in an up position. Move it down to enable
printing.
