Euro 500TE Handy
© Elcom, s. r. o.
55
Reports
Reports
How to print out reports
There are two modes for printing reports: “X”
mode and “Z” mode.
Use the reading mode “X” when it is necessary
to obtain sales information since the last reset-
ting. It is used to generate reports during the
day, between two shifts, etc. The reading may
be made any number of times. It does not af-
fect the register memory.
Use the resetting function of the “Z” mode
when you need to print reports and to clear the
register’s memory. “Z” report is usually carried
out once a day after finalizing the daily report.
Generated reports
Note: In the “Z” mode the department report,
the cashier’s report and the financial report are
carried out by means of the total “Z” report.
Report contents
Report
“X” mode
“Z” mode
Department
•
PLU
•
•
Cashier
•
Financial
•
Total/Daily
•
•
Periodical
•
•
Combined
•
•
El. journal
•
PC sale data
•
•
Department reports
When printing a full department report, only
non-zero value departments are printed.
Report contains:
1) Name of the department
2) Number of items sold in the department
3) Total value of the items sold in department
4) Total value of sales including all depart-
ments
Note: In the “Z” mode it is possible to print
the department report only by means of the
total “Z” report. See chapter on total/daily
“Z” report.
PLU reports
Three different types of PLU reports can be
printed: the individual PLU report, report of
PLU range, and the full PLU report. Each of
these types can contain the PLU number ac-
cording to the mode of report function or call-
ing and stock status according to the setting of
2nd PLU flag.
When printing a PLU report, only non-zero
PLUs are printed.
PLU report contains:
1) Number of the PLU (selective according to
the mode of report function calling).
2) The name of the PLU.
3) Number of the PLU sold.
<< Table 5.1
Available report types
