Euro 500TE Handy
© Elcom, s. r. o.
31
ECR programming manual
4) PLU name
5) PLU bar code
If a PLU is programmed as a descriptive PLU,
its name is printed onto the receipt, but no sale
data are registered (such as number sold or the
Price).
PLU programming procedure:
1) Switch the cash register into the “P” mode
by pressing
4A
.
2) If you want to programme a specific PLU,
enter its PLU number and press the
c
(
PLU
) button. If you don’t enter any
number, the programming will start from
the first PLU. The PLU number and label
PRICE
will appear in the first display row
and its current price will be shown in the
second row.
3) Enter the price (maximum eight digits in-
cluding two decimals). If you made a mis-
take, use
F
(
Clear
) to correct it.
4) Press the
D
(
Subtotal
) button to con-
tinue with programming of the first PLU
flag. The display will show PLU number
and label
FLAG1
in the first row and the
current flag values in the second one. Press
E
(
Total
) to exit PLU programming at
any time (following steps will not occur).
5) Enter the values for the first PLU flag; see
table 3.20 for reference. Correct any mis-
takes using
F
(
Clear
) key. PLUs within
1,001–1,015 mustn’t be assigned to a nega-
tive department.
6) Press
D
(
Subtotal
) to programme sec-
ond flag for the current PLU. The display
will show PLU number and label
FLAG2
in the first row and the current flag values
in the second one. Press
E
(
Total
) to
exit PLU programming at any time (fol-
lowing steps will not occur).
7) Enter the values for the second PLU flag;
see table 3.21 for reference. Correct any mis-
takes using
F
(
Clear
) key. PLUs within
1,001–1,015 cannot be linked to any other
PLU.
8) Press
D
(
Subtotal
) to continue with
programming of PLU name for the current
PLU. The display will show the number of
current PLU along with
NAME
label in the
first row and display the currently assigned
tax level rate and PLU name in the second
row. Press
E
(
Total
) to finish the PLU
programming (following steps will not
run).
9) Enter the PLU name (up to 14 normal
characters or seven double-width charac-
ters). The procedure for entering texts is at
the end of the chapter. Use
F
(
Clear
)
key to correct any mistakes.
10) Press
D
(
Subtotal
) to programme the
bar-code for the current PLU. The display
will show current PLU number and
BAR
CODE
label in the first row and the cur-
rently programmed bar-code in the second
row. Press
E
(
Total
) to exit PLU pro-
00001. PLU PRICE
10.00
00001. PLU FLAG1
01000
Digit Default value
Meaning
Valid values
1
0
Assignment of PLU to a tax level
0 – PLU without tax, 1–6 – PLU is as-
signed to respective tax level (1–6)
2–3
01
Assignment of PLU to a department
1–30
4
0
Descriptive PLU
0 – no, 1 – yes
5
0
PLU type
0 – ordinary PLU, 1 – single PLU sale
6
0
Sale options
0 – sale forbidden, 1 – price entry
from keyboard is allowed, 2 – pre-pro-
grammed price is allowed, 3 – both
keyboard entry and pre-programmed
price are allowed
< Table
3.22
Meaning of the 1st PLU
flag.
00001. PLU FLAG2
0010118
00001. PLU NAME
10% Wholecorn
bread
