Euro 500TE Handy
© Elcom, s. r. o.
32
ECR programming manual
gramming immediately (following steps
will not run).
11) Enter the bar-code for the current PLU by
entering it via keyboard or by scanning it
via scanner (the scanner has to be connect-
ed and configured). You can delete incor-
rect numbers by
F
(
Clear
) key.
12) Depending on the ECR settings (sixth elec-
tronic journal flag, digit no. 1 or 2 equals 1)
the ECR asks the bar-code type if it con-
tains extension. Press
D
(
Subtotal
)
button to store 13-digit bar-code or press
C
(
Check
) to store 15/18-digit bar-code.
13) If the bar-code you’ve just entered is al-
ready present in the ECR, the ECR will
display the
BAR CODE DUPL.
message
to alert you of this fact and also displays the
number of the conflicting PLU.
14) After entering the bar-code the ECR con-
tinues with PLU programming at the next
available PLU; continue with step 3. Press
E
(
Total
) to finish the PLU program-
ming. After you finish the programming,
the ECR will sort the entered PLU bar-
codes that is also indicated on the display.
If the ECR loses power during sorting,
the sorting will resume as the power is re-
stored.
Bar-code scanner configuration
The required communication configuration
for the scanner is:
• eight
data
bits
• no parity checks
• one stop bit
• transmission speed and end char-
acter are set according to the fifth
ECR system flag
The default setting of flag no. 5 corresponds
to Metrologic bar code scanners (MS 951, MS
6720, MS 7100, MS 860, MS 6130 and MS
9520). Read the following bar codes from the
scanner programming manual:
1) Enter/Exit
2) Recall Default
3) Enter/Exit
The ECR is able to handle bar codes contain-
ing data for product weight. The format is the
following: PP XXXX V MMMMM K; PP –
prefix of bar code (28 or 29), XXXX – PLU
number (0001–2400), V – scales check digit,
MMMMM – product weight (three decimal
digits), and K – bar code check digit.
„For proper reading of EAN 13+2/13+5 bar-
codes it is necessary to make special adjust-
ments to scanner configuration. Details on
Digit Default value
Meaning
Valid values
1–2
00
Linking a PLU that will sell together
with the current PLU
00 – no PLU is linked to the current
one, 01–15 – sale of current PLU will
also sell PLU nr 1,001–1,015
3
1
Assignment of a sale unit to current
PLU
1–8 – assign respective sale unit to this
PLU
4
0
Print the PLU stock values in the
PLU report
0 – no, 1 – yes
5
1
Sale when stocks are negative
0 – forbidden, 1 – allowed
6
1
Fractional sale of the PLU
7
8
Maximum number of numerals that
can be entered when entering a price
for this PLU (HALO)
0–8
Table
3.21
>
Meaning of 2ⁿd PLU
flag.
00001. PLU BAR CODE
8586001760034
BAR CODE DUPL.
00003. PLU
CODE SORTING
WAIT PLEASE
18 digits,choose form
13 - MS / 18 - CHECK
