ELCOM Euro-2100TE, User Manual

Page: 56 / 116

56
Programming manual
116 0x74 Total (KONTANT), key [=] for calculator 33/66 33/66
114 0x72 Refund (RETUR) 5/38 40
44 0x2C Paid out (UTBET) 45 47
46 0x2E Received on account (INBET) 51 54
113 0x71 Password (EXP) 57 38
88 0x58 Duplicate (KOPIA) 6/39 39
45 0x2D Percentual discount (%-) 3/36 53
61 0x3D Percentual Add-on (%+) - -
200 0xC8 Value discount (KR-) 2/35 52
201 0xC9 Value Add-on (KR+) - -
62 0x3E Second Price (MOMS SKIFT) 4/37 3/36
64 0x40 PLU price question 42 37
PROGRAMMING OF THE PROGRAMMABLE KEYBOARD KEYS
This procedure describes how to programme the programmable electronic cash register keys. An individual
key could be programmed with arbitrary keystroke sequence (function keys, up to 16) that will be generated
when the programmed key is pressed in the future.
The programming of keys starts in programming mode

. Press the key you wish to program.
1. The display shows the ID number of programmable key, the label „Key Name“ and the current name
assigned to that key.
2. Enter a new name and confirm by pressing the

(SUBTOTAL) key. If you press

(SUBTOTAL)
key without entering anything, you just confirm the previous assigned name. When you press

(TOTAL), the key programming procedure ends.
3. If you have changed name for the programmed key, the electronic cash register will update its set-
tings and print the information about key name change on the receipt (ID number of programmed key
and the data of changed parameter -- label „Key Name“ and its newly programmed value).
4. The display will then show the ID number of the programmable key, information label for the function
programming „01.Func“ and text description of the current key function.
5. Press

(MULTIPLY) key to enter the key programming mode. The display will ask you to press
a key. By pressing a function key, you‘ll assign its value to the programmed key. Keep pressing to
add further function keys to the programmable sequence or press the currently programmed key to
finish programming and assign the programmed function sequence to that key. The electronic cash
register will update the key definition and print the change information messages to both receipt
and journal (this information includes programmed key ID number, record type „01.Key“, info label
on function programming and its number „01.Func“ and the programmed function sequence). The
electronic cash register then continues with programming of next key, or goes to the first key if the
currently programmed key was the last one.
6. If you didn‘t enter into the key programming mode, then you can press

(SUBTOTAL) to confirm
the current value and proceed to the next key (or the first key if you were on the last key) and the
programming procedure continues again with step 1.
7. Press

(TOTAL) button to exit the programming mode.