ELCOM Euro-2100TE, User Manual

Page: 43 / 116

43
Programming manual
0.00
1
VGR PRIS
3) Enter the new department price (maximum eight digits, including decimals). If you mistype, you can
correct your mistakes by pressing

(CLEAR) key.
4) Press the

(SUBTOTAL) key to continue with programming the flag for the current department. The
display shows current department number in the second display row together with label (“
FLAG
”)
to indicate department flag programming. The value of department’s flag is shown in the first display
row. Press

(TOTAL) key to stop department programming (next steps will not run).
5) Enter the department flag for the current department according to the figure 3.22. If you mistype,
you can correct it using the

(CLEAR) key.
10038
1
VGR FLAG
Figure 3.22 Department flag values
Digit Default setting Meaning Valid values
1 1 Assigning VAT level to a department
1 – tax level 1,
2 – tax level 2,
3 – tax level 3,
4 – tax level 4,
2 0 Type of department
0 – normal,
1 – single item department
3 0 Negative department
0 – no,
1 – yes
4 3 Sale feature
0 – sale forbidden,
1 – open price (manually entered price),
2 – fixed price (preprogrammed price),
3 – 1+2 (preprogrammed price or the pos-
sibility to enter a price manually)
5 8
HALO limit, maximum 8 (maximum number
of digits allowed)
1-8
6) Press

(SUBTOTAL) key to continue with programming the name for the current department. The
electronic cash register display shows current department number along with the label (“name”) in
the second display row; first display row contains current department name on the right.
VGR01
1 VGR NAMN
7) Enter the department name. If you mistype, you can correct your mistakes by pressing

( C
LEAR
).
See the end of chapter for more detailed instructions on entering texts.
8) Press the

(SUBTOTAL) to continue department programming for next department; proceed to step
3). and the programming of departments can be finished at any time by pressing

(TOTAL) key.
Departments correcting
1) Switch the electronic cash register to the “P” mode by pressing

.
2) Enter the number of the department you want to adjust (1–30) and press

(DPT) key, or press the
selected department button to directly choose required department.
3) Continue re-programming desired values as shown in the section above.