ELCOM Euro-2100TE, User Manual

Page: 38 / 116

38
Programming manual
TAX RATES PROGRAMMING
The cash register allows the use of four tax rates plus one rate without tax. Both the tax rate and its name are
programmable. Tax can be programmed only after daily, monthly report.
Tax level programming procedure:
1) Switch the electronic cash register into the programming mode “P” by pressing

.
2) Press the

(REFUND) key. The display shows the number of programmed tax level and its rate.
25.00%
1
MOMS SATS
3) Enter the tax rate without decimal point. First two numerals compose integer part of the rate, last two
compose decimal part (i. e. for tax rate of 19% it is 1 9 0 0). The tax rate can be changed only after
daily and periodical report have been executed in “Z” report mode. If you need to disable a specific
tax level, programme its tax rate as 100.00% or higher.
4) Press the

(SUBTOTAL) key. Display will show label for programming the tax level name.
5) Enter name of TAX level, which will be printed on receipts and reports. Save entered value and move
to next VAT setting with key

(Subtotal).
6) To exit the tax level programming, press

(Total) key. More details on entering texts are located
at the end of this chapter.
Correction of the tax level values
1) Switch the electronic cash register into the “P” mode by pressing

.
2) Enter the number of the tax level you want to edit and press the

(REFUND) button.
3) Re-program the parameters as described in section above.
4) You can print the newly programmed tax level values by pressing

(CHECK) key.
5) Finish the corrections by pressing the

(TOTAL) key.
Printing of the programmed tax values
To verify the programmed values, print them by pressing the

(CHECK) button in the tax programming
mode. If working in another programming mode, press the

(REUND) key and then the

(CHECK) key.
It is possible to print the rate and name of a particular tax level by pressing the

(EAN) button.
Programming of organization ID
The Organization ID is printed as 9th row in the top text logo. To set it, enter P mode
 
and enter code
    
. After that the electronic cash register will request to enter the organization ID with help
of the numeric keypad. The organization ID number has the following form: XXXXXX-XXXX.
PROGRAMMING OF TOP AND BOTTOM TEXT LOGO
The electronic cash register allows to print six rows of text and two rows of bottom logo (ex. Roys Food Store)
at the end of the receipt.
Logo programming procedure:
1) Switch the electronic cash register to the “P” mode by pressing

.
2) Press the key

to program the top text logo or the key

(EAN) to program the bottom text
logo.