ELCOM Euro-2100TE, User Manual

Page: 114 / 116

114
Helpful advice
Self-test of the electronics and display
By executing this test, characters are gradually lightened on and off on the both displays.
Procedure for running the self-test of the electronics and display:
1) Switch electronic cash register into the “P” mode:

.
2) Press

on the keyboard.
3) Press the

(MULTIPLY) button.
Display test end is announced by a beep. You can continue testing other parts of register.
Self-test of the printer
The self-test of the printer prints the identification data of the Euro-2100TE on the receipt and journal. It prints the
program version number, cash register configuration (number of departments, number of PLUs), serial interface and
FM enable/disable information and the complete character set in standard size with related hexadecimal codes.
Procedure for running the self-test of the printer:
1) Switch electronic cash register into the “P” mode:

.
2) Press

on the keyboard.
3) Press the

(MULTIPLY) button.
The printer test end is announced by a beep. You can continue in testing of other parts of register.
Self-test of the keyboard
The self-test of the keyboard displays the position, hexadecimal code and name after pressing a key. The test
checks functionality of the register keys.
Procedure for running self-test of keyboard:
1) Switch electronic cash register into the “P” mode:

.
2) Press

on the keyboard.
3) Press the

(MULTIPLY) button.
4) Press the individual buttons one after another and check the values on the display.
5) To finish the test press the

(TOTAL) button.
If the key is functional, its position, code and name will appear on the display. Press the

(TOTAL) button
to finish the keyboard test.
Self-test of the keyboard II.
This second self-test of the keyboard evaluates the consecutive pressing of keys. If the electronic cash register
also contains an optional programmable keyboard, the self-test will also evaluate this keyboard. If the keys are
pressed in the exactly defined order shown in Figure 8. 1. (8. 2), and the keyboard and its control circuits are
working fine, the test is finished successfully.
1) Switch electronic cash register into the “P” mode:

.
2) Press

on the keyboard.
3) Press the

(MULTIPLY) button.
4) Press the individual buttons one by one following the direction shown in Figure 8. 1. (8. 2).
5) To finish the test press the

(TOTAL) button.