ELCOM Euro-2100TE, User Manual

Page: 44 / 116

44
Programming manual
4) You can print out all the programmed department values by pressing

(CHECK) key; to print out
the currently programmed department, press

( EAN ) key.
5) Finish the corrections by pressing

(TOTAL) key.
Department values print out
Check the programmed department values by pressing the

(CHECK) key in the department program-
ming mode. In the programming mode, press the direct button of a department or a department number and
then press the

(DPT) button. Afterwards press the

(CHECK) button. To print the settings of currently
programmed department, press the

(EAN) key.
SALE UNITS PROGRAMMING
Sale unit can be assigned to each PLU and represents the unit in which the PLU is sold. It is possible to
program eight sales units with up to three characters each. Figure 3.23 shows the default settings for sale
units; you can adjust these defaults to your needs.
Sale units programming procedure:
1) Switch the electronic cash register to the “P” mode by pressing

.
2) Press the

(Value discount) key. The electronic cash register display shows the current sale unit
number along with the label (“
F
ö
rs.enhet
”) in the second display row and programmed unit in
the first row.
3) Enter the text for the current sale unit (up to three characters). You can correct mistypes by pressing

(CLEAR) key. See the section on entering texts at the end of this chapter.
st
2 F
ö
rs.enhet
Figure 3.23 Default sale units
Digit Units Digit Units
1 5 m
2 st 6 m 2
3 kg 7 fl
4 l 8 pkt
4) Press

(SUBTOTAL) key to continue sale units programming with the next sale unit. Finish sales
unit programming at any time by pressing the

(TOTAL) key.
Programmed sale units correcting
1) Switch the electronic cash register to the “P” mode by pressing

.
2) Enter the number of the sales unit you want to modify and press

(Value discount) key.
3) Continue the programming as described in the previous section (see above).
4) You can print out all programmed sale units by pressing

(CHECK) key. To print the currently
programmed sale unit, press

(EAN) key.
5) Finish the corrections by pressing

(TOTAL) key.
Sale unit settings print out
If you want to check the settings of the sale units, press the

(CHECK) key in the sale units programming
mode. If the electronic cash register is in the programming mode, first press the

(Value discount) key,
then the

(CHECK) key. For a printout of the current sale unit, press the

(EAN) key.