113
Helpful advice
CC COMM.SEQUENCE ERR
Internal failure of communication with CleanCash, call service.
ECR <-> CC
Proceeding of electronic cash register and CleanCash data transfer.
WHAT TO DO IN CASE OF POWER FAILURE?
Power failure
This part is important only for registers that operate without the built-in accumulator.
If you have used the cash register and a power failure occurs, it is necessary:
• to switch the cash register off
• after electric power recovery switch the cash register on
• if the register displays the text Continue on Sale it is necessary to complete the purchase and compare the
resulting sum with the total of registered items within the purchase; if one of the items has not been added
to the total sum of the purchase but it was sold to the customer it is necessary to register it additionally.
Failures of electronic cash register as a result of interference in power
network
Accidental failures of electronic equipment are frequently caused by the power network or by electromagnetic
interference. In case of intensive interference in your working area, or in case of over or under voltage, installa-
tion of protective devices can help significantly. Ask your authorised dealer or service technician for help.
Signalization of internal accumulator conditions
The status of internal accumulator charge defines the percentage value in the upper left corner of the cashier
display. This percentage value informs also that power supply of the electronic cash register is internal ac-
cumulator (the external adapter is not connected). In the case the charge is low (low percentage value) the
electronic cash register displays the text Low BAT., finish sale for a short time and peeps alerting tone.
If the internal accumulator is very discharged and you want to charge it by the external adaptor, first of all
be sure that electronic cash register is turned off, then connect the external adapter for at least 15 minutes
(electronic cash register is off). The internal accumulator is charging even the electronic cash register is
turned off.
Care of internal battery:
• a complete battery charge takes 4 to 5 hours.
• we suggest to charge a battery to 100 % and use it till cash register starts to signalize the battery charge
requirement. Repeat this process three times at least (it elongates an endurance of the battery).
• we suggest to change the battery in case of the battery decrease, e. g. shorter work cycle of the elec-
tronic cash register after a battery charge.
SELF TESTS
Self tests of the Euro-2100TE cash register permit the checking of its functionality simply and quickly. Self
testing permits the automatic checking of the functionality of electronic circuits, display segments, keyboard
buttons, communication ports and the printer.
Summary of Contents for Euro-2100TE
