ELCOM Euro-2100TE, User Manual

Page: 30 / 116

30
Programming manual
SYSTEM FLAGS PROGRAMMING
Prior to programming of the electronic cash register, it is recommended that this sub chapter is carefully
studied and clearly understood.
Note:
If a key is used for two functions, choose the function in a lower part of a key by pressing the key. To choose
the function in the upper part of a key, press once the

(SHIFT) key and press the particular key.
Initial programming of system flags
The system flags represent settings that have primary influence on the proper performance of electronic cash
register (number of decimal places, rounding, date, time, etc.).
System flags programming procedure:
1) Switch the cash register into the “P” mode by pressing

. On the display appears „
P
” (left
bottom on the display). Only a cashier authorised for the programming mode can set the electronic
cash register into the “P” mode.
2) Press

(RA) buttons.
301222
SF1:
3) After entering flag values, store them by pressing the

(SUBTOTAL) button. The programming of
the next flag follows. Continue until you have programmed all necessary flags.
4) Finish flags programming by pressing the

(TOTAL) button.
System flags correction
1) To change the settings of any system flags, switch the cash register into the “P” mode by pressing

.
2) Enter the flag number to be edited and press the

(RA) buttons.
3) Enter desired flag value and press the

(SUBTOTAL) button.
4) Print the new programmed settings by pressing the

(CHECK) button.
5) Finish the programming by pressing the

(TOTAL) button.
System flags values print out
In the programming mode, select the flags programming by pressing the

(RA) buttons. Press the

(CHECK) button to print the flags values. It is possible to print the value of currently programmed flag by
pressing the

(EAN) button.
Flag 1 – Number of decimal places, method of rounding, TAX system
Figure 3.1 First system flag values
Digit
Default setting
Meaning Valid values
1 3
System of rounding
0 – up from 5,
1 – always up,
2 – always down,
3 –special rounding
2 0 Tax system
0 – VAT
1 – TAX
3 1 Number. of decimal places to which total price should be rounded 0 – 2