ELCOM Euro-2100TE, User Manual

Page: 32 / 116

32
Programming manual
Flag 5 a) - Communication with PC and payment terminal
Figure 3.5 a) Fifth system flag values
Digit Default setting Meaning Valid values
1 1 PC & CleanCash port number
0 – device is not used
1 – PC(2)
2 1
Programming of communication speed for the PC.
Parity: none, DataBits: 8, StopBits: 1
0 – 9 600 Bd
1 – 38 400 Bd
3 0 Data transmission direction in PC-ONLINE mode 0 - function not used
4 0 Payment terminal port number 0 – device is not used
5 1 Communication protocol for payment terminal 0 - device is not used
6 0
External Journal Reader connectivity (Port replica-
tion)
0 - device is not used
1 - device is connected
Note:
* If the electronic cash register had connected to the PC port, an Scale, the flag which is setting it will be
automatically changed to the replicated port on external journal reader.
* With USB communication (or with RS458 communication), in order to switch on the communication
port, the first number of the 5th system flag has to be set to 1. With USB communication, a USB driver
has to be installed on the PC from the support CD; it is also available at www.elcom.eu.
Flag 5 b) - Scanner and scales configuration
Figure 3.5 b) Fifth system flag values
Digit Default setting Meaning Valid values
1 2 Scanner & CleanCash port number
0 – device is not used
2 - SCAN./SCALE (3)
2 3 Bar code scanner communication speed
0 – 1 200 Bd
1 – 2 400 Bd
2 - 4 800 Bd
3 - 9 600Bd
4 - 19 200Bd
3 0 Terminal code for the bar code scanner
0 – terminal CR and LF
1 – terminal CR
2 – terminal LF
4 2 1st scale port number
0 – device is not used
1 – PC(2)
2 - SCAN./SCALE (3)
5 0 Communication protocol for 1st electronic scale
0 - CAS Morcan, MARTES T
1 - Euro scales, MARTES M
2 - Macca K
3 - Dibal
4 - Motex R
6 - Mettler Toledo
7 - ACOM
8 - CAS Morcan TP2
6 1 2nd scale port number
0 – device is not used
1 – PC(2)
2 - SCAN./SCALE (3)
7 0 Communication protocol for 2nd electronic scale
Same as „Communication protocol
for 1st electronic scale