ELABO G7-1G, Operating Manual

Page: 73 / 139

73
10. Menu System
- Edit the parameter values. The test parameters it self are described in
chapter 11.
„Test“
- starts the manual test with the actual parameter values - see
also chapter 10.3.
„Save“
- saves the changes made. You can assign a new name to the
modified set or use the old name (overwrite the parameters) .
„Selection“
- of a special parameter set. The parameter set selection is
shown.
„Menu“
- closes the parameter screen and returns to the menu. before
test
Combi-tester G7-1G/-1H/-1T/-1U
test mode .................
test voltage .........[kV]
run-up ...............[kV/s]
run-back ...............[kV/s]
off
0.10
1.50
HV
test


HV_1500 AC
Fig. 10.13: Parameter set - Parameter mask HV_1500 AC
back to menu before
parameter values
further parameter
function buttons