ELABO G7-1G Operating Manual Download Page 124

Page: 124 / 139

124

12. Input/Output test step

12.6 Load and execute test plans (Input/Output)

Prerequisite: See chapter 12.5.

Note:

The execution of test plans is possible in manual mode or in auto-

matic mode. The setting is made in the menu "Setup - Test plan mode".

See also chapter 10.4 - illustr.. 10.41.

Test plan mode - step:

The start of test-steps must be done by

user-input (eg, push button).

Test plan mode - auto:

Test-steps are running as sequence au-

tomatically.. Only if "error" an operator intervention is required.

Choose "test plan" in the main menu.

Choose "Load test plan" in the main "test plan".

Choose the desired test plan at the list. See also chapter 10.5.

It is possible to edit the loaded test plan on this place (insert or delete

parameter blocks).

12.6.1 Start /execute test plan (auto- mode)

Note:

Test-steps are running as sequence automatically.

Combi-tester G7-1G/-1H/-1T/-1U

Summary of Contents for G7-1G












































































































































Search results

Summary of Contents for G7-1G

Reviews:

Related manuals for G7-1G

Brands by name

Popular brands

ELABO G7-1G, Operating Manual

Search results

Summary of Contents for G7-1G

Reviews:

Related manuals for G7-1G

Brands by name

Popular brands