EKOM DK50 4x2VT/M, User Manual

Page: 30 / 60

INSTALLATION
NP-DK50-Nx2VTM-AD-EN-6_04-2022 30 04/2022
Fig. 17: Connecting the electrical cables

Connect the disconnected
electrical cables (E) to the
terminal strips in the electric
motor boxes. Insert the cables
into the electrical installation
trays and enclose with a cover.
Fig. 18: Connecting the power cord

Connect the TN-S mains to the power
supply terminal in the equipment’s
junction box (F). Connect the electrical
components to the mains in accordance
with the valid electrical standards and
regional regulations.
Fig. 19: Connecting the cable to the pressure switch

Connect the loose cord to the pressure
switch per the schematic, or Fig. 19,
tighten the screws and secure with paint