PRODUCT DESCRIPTION
04/2022
15
NP-DK50-Nx2VTM-AD-EN-6_04-2022
Fig. 3: Electrical box / switchboard
The range of the pressure
switch
on
the
configured
assemblies
may
only
be
adjusted
after
prior
consultation
with
the
manufacturer.
Adjusting the pressure setting
of the safety valve is expressly
prohibited.
The pressure relief valve automatically
begins to vent air from the system if the
pressure in the compressed air circuit
exceeds its pre-set value. The pressure relief
valve then closes as the pressure drops.
Pressure in the compressed air
circuit
can
only
increase
because of an increase in flow
resistance in the compressed
air lines or as a result of a dryer
malfunction (e.g. solenoid valve
malfunction, an increase in flow
resistance through the drying
media, etc.), and therefore the
repeated opening of the relief
valve requires a dryer function
check and repairs if necessary.
Consultation
with
the
manufacturer is required before
any adjustment is made to the
relief valve!
The outlet openings on the
relief valve must not be blocked
and the flow of compressed air
through them may not be
restricted.
Summary of Contents for DK50 4x2VT/M
