INSTALLATION
04/2022
29
NP-DK50-Nx2VTM-AD-EN-6_04-2022
A G3/4” (F) ball valve is installed on the compressed air outlet from the air tank.
Fig. 15: Air outlet from the air tank
Potential
for
damage
to
pneumatic components.
Ensure the air hoses are not
kinked.
13. ELECTRICAL CONNECTION
Unauthorised
interference
hazard
Only a qualified electrician may
install electrical components!
Risk of damage to the device.
The operator is obliged to
provide
circuit
protection
devices for the equipment per
the
specifications
in
valid
technical standards.
The
product
is
delivered
without a power cord.
Cord type (minimum requirements) H05 VV-
F_ 5G10
Risk of electric shock.
Ensure full compliance with all
local electrical codes. The
mains voltage and frequency
must comply with the data
stated on the nameplate on the
equipment.
Fig. 16: Connecting the protective PE conductors
Connect the disconnected PE
protective conductors and then
the
grounding
wire
after
connecting (D).
Summary of Contents for DK50 4x2VT/M
