EKOM DK50 2x4VR/110/M, User Manual

Page: 20 / 168

INSTALLATION
NP-DK50 2x4VR 110-AD-A-1_09-2020 20 09/2020
Fig. 4: Handling the compressor

Remove the transport stabilisers from the air pumps (Fig. 5).
Prior to installation, ensure that the compressor is free of all transport packaging
and stabilizers to avoid any risk of damage to the product.
Remove all devices used to secure the aggregates once the compressor is
installed and levelled at the site of final installation.
Fig. 5: Releasing the air pumps
Assembly of the AD dryer

Remove the dryer from the packaging.

Install the dryer in its operating position (Fig. 6).
At least two persons are needed to handle the equipment.
Integrated handles are installed on the lower brackets on the product. Each person must grasp the
equipment with one hand on a handle and the other behind the dryer chamber when moving the
equipment.