EKOM DK50 2x4VR/110/M, User Manual

Page: 19 / 168

INSTALLATION
09/2020 19 NP-DK50 2x4VR 110-AD-A-1_09-2020
INSTALLATION
Risk of incorrect installation.
Only a qualified technician may install the compressor and place it into operation
for the first time. Their duty is to train operating personnel on the use and
maintenance of the equipment. An entry is made in the equipment installation
record to certify installation and operator training. (see the Annex chapter)
9. INSTALLATION CONDITIONS

The compressor may only be installed and operating in dry, well-ventilated and clean
environments under the conditions specified in the Technical Data chapter.
Risk of damage to the device.
The equipment may not be operated outdoors or in otherwise wet or damp
environments.
Risk of explosion.
Do not use the equipment in the presence of explosive gases, dust or
combustible liquids.
Burn or fire hazard! Caution! Hot surface!
Portions of the compressor, dryer and connecting hoses between the dryer and
compressor may be hot and reach hazardous temperatures during compressor
operation that may harm materials or operating staff.

The compressor must be installed so that it is accessible at all times for operating and
maintenance. Please ensure that the nameplate on the device is readily accessible.

The compressor must stand on a flat, sufficiently stable base (be aware of the weight of the
compressor, see the Technical Data chapter).
High temperature hazard.
The placement of air flow impediments upstream or downstream of the cooler is
prohibited. The temperature of internal and external parts of the cooler may be
hot and reach hazardous temperatures.
10. COMPRESSOR ASSEMBLY
10.1. Handling and releasing the compressor

Unpack the compressor from the packaging.

Position the compressor at the site of installation. (Fig. 4)
Use the handles on the compressor to move the compressor as needed. Do not
use other parts of the compressor (the aggregate, cooler, etc.) for grip