EKOM DK50 2x4VR/110/M, User Manual

Page: 26 / 168

INSTALLATION
NP-DK50 2x4VR 110-AD-A-1_09-2020 26 09/2020
11.3. Connecting the cabinet pressure gauge to the compressor

Remove the plug (1) from the threads
(2) on the pneumatic block of the
compressor

Connect the cabinet pressure gauge
hose to the threaded fitting
Fig. 15: Connecting the cabinet pressure gauge to the compressor
11.4. Routing hoses and electrical cables in cabinet-mounted compressors

Route the hose and electrical cables through the opening in the rear wall of the cabinet for
compressor models with a dryer.
Risk of damage to pneumatic components.
Air hoses must not be broken.
12. ELECTRICAL CONNECTION

The product is delivered with a cord equipped with a plug with earthing pin.

With cabinet-mounted compressors, route the power cord through the opening in the back wall
of the cabinet.

Keep the socket easily accessible to ensure that the device can be safely disconnected from the
mains.

Connection to the power distribution cabinet must be max.16 A
Risk of electric shock.
It is necessary to follow all local electro technical regulations. The mains voltage
and frequency must comply with the data stated on the device label.
Risk of fire and electric shock.
Electrical cord must not be broken.
Connecting the control harness and power cord from the compressor

Connect the control harness and power
cord from the compressor to the dryer
socket (1).