Application manual
KNX room temperature controller EK-EQ2-TP
Release 3.00 - Updating: 27/06/2017
Application Manual
© SBS S.p.A. - All rights reserved
Page 16
operating mode (comfort / standby / economy / building protection);
seasonal mode (heating / cooling);
device status calling / not calling (or setpoint reached / not reached);
operation in manual mode (M);
operation as slave device (clock);
fan status (1-2-3-automatic-off), when present;
device physical address assigned by ETS.
Display symbols
Digits (for numeric values display)
Economy operating mode (night)
Celsius degrees
Standby operating mode
Fahrenheit degrees
Comfort operating mode
Percentage (relative humidity)
Heating mode active (device not calling
or setpoint reached)
Per mille (only for CO
2
concentration)
Heating mode active (device calling or
setpoint not reached)
Alarm
Manual operation (M)
Window opening
Slave (operation subordinated to a
supervising KNX device)
Carbon-dioxide (CO
2
)
Cooling mode active (device not calling
or setpoint reached)
Indoor temperature
Cooling mode active (device calling or
setpoint not reached)
Outdoor temperature
OFF (fan-coil switched off)
Relative humidity
Automatic fan-coil operation (example:
speed 3)
SET
Manual fan-coil operation (example:
speed 2)
Building protection operating mode
(off)
Symbols that can be activated on the LC-display
4.1.2
Segment test
The segment test allows you to check at any time the proper functionality of the display. In order to do the
test, press simultaneously + (plus) on the upper rocker and the symbol
on the lower rocker for more