56
Chapter 4 Management of Network Cameras
4.
Set each item and select “OK
”.
Item
Detail
Setting range
Camera Name
*1
Enter the camera name. If “Obtain Camera Name” is
selected, the camera name is automatically obtained from
the network camera.*
2
Attention
• “Obtain Camera Name” cannot be used if Protocol is set to
“DirectUri” or “SRT”.
Alphanumeric,
kana
*3
, and
kanji
*3
(Up to 24
characters)
IP Address
Enter the IP address of the network camera.
0.0.0.1 to
255.255.255.254
“Ping” button
Executes a connection test with the camera (i.e. ping
command).
-
Port
Enter the port number of the network camera.
1 to 65535
*4
SSL
*5
Provides secure communication.
-
Certificate Validation
Select certificate validation during SSL communication.
Attention
• If “C
ertificate Validation
” is “On
,” the Root Certificate of the
network camera must be registered in “
Root Certificate
” of
“
Certificate
”.
On /
Off
Protocol
Select the protocol to control cameras.
Panasonic / AXIS /
ONVIF / DirectUri /
SRT
*6
Username
*7
Enter the user name to be used to access the network
camera.
Alphanumerics and
symbols (Up to 32
characters)
Password
*7
Enter the password to be used to access the network
camera.
Alphanumerics and
symbols (Up to 32
characters)
Media Profile
*8
Select the media profile of the network camera.
Select “
Obtain Profile” to obtain a list of profiles from the
network camera.
EIZO_Profile /
Profile of each
camera
Transmission Mode
*8
Select the mode for transmitting camera video images.
Unicast / Multicast
URI
*9
When Protocol is set to “DirectURI”, set a URI that starts with
rtsp:// or rtp://.
When Protocol is set to “SRT”, set a URI that starts with srt://.
Alphanumerics (Up
to 1023 characters)
Comm. Method
*10
Select the communication method for camera video images. RTP over UDP
*11
/
RTP over RTSP /
SRTP over UDP
*12
/
MPEG2-TS over
UDP
*13
Stream
*14
Select a stream format.
1 / 2 / 3 / 4
Channel
*14
Select a stream channel.
1 / 2 / 3 / 4
RS485PTZ Control
*14
Select whether or not PTZ operation is enabled for the
camera that supports RS 485 communication.
On /
Off
