Efka SM210A5710, Instruction Manual

Page: 45 / 48

EFKA SM210A5710 45
SUPPLIER LEVEL
Parameter Designation Unit max min Preset Ind.
Prg.
No.
270 bAu --- = Automatic baud rate increase from the 6500 0096 --- A
preset baud rate of 9600 onwards
0096 = Baud rate 9600 baud
0192 = Baud rate 19200 baud
0312 = Baud rate 31200 baud
0384 = Baud rate 38400 baud
0416 = Baud rate 41600 baud
0560 = Baud rate 56000 baud
1250 = Baud rate 125000 baud
3125 = Baud rate 312500 baud
6500 = Baud rate 650000 baud
271 cot 0 = No remote station 2 0 2 A
1 = Drive is master
2 = Drive is slave
272 Adv RS232 address (drive identification) 255 251 254 A
274 bMx Possibility of setting the maximum adjustment value if 65535 0 65535 A
parameter 290 = “5“. Limitation of stepping motor steps
after reference point adjustment without interfering with
the mechanism.
290 Fam Mode of operation of the stepping motor control: 9 0 0 A
0 = Mode manual metering device
Insertable strip for V810 and V820 = 5
1 = Mode metering device at the start of the seam
Insertable strip for V810 and V820 = 1
2 = Mode metering device at the seam end
Insertable strip for V810 and V820 = 1
3 = Mode expander feeding
Insertable strip for V810 and V820 = 2
4 = No function
5 = Modus Mehrweitenverstellung
Einschubstreifen für V810 und V820 = 4
6 = Keine Funktion
7 = Mode machine for attaching cuff and heel tape
with metering device at the seam end
Insertable strip for V810 and V820 = 1
8 = Mode puller function 1 (operation with Efka-
controls AB60D, AB62CV, AB220A)
Insertable strip for V810 and V820 = 3
9 = Mode puller function 2 (operation with other
controls)
Insertable strip for V810 and V820 = 3
291 810 Select insertable strip number for V810 control panel 6 1 5 A
(illustrations of insertable strips see the following
chapter).
292 820 Select insertable strip number for V820 control panel 6 1 5 A
(illustrations of insertable strips see the following
chapter).
293 tF1 Functions of pushbutton A on the V810/V820 control 18 0 3 A
panels (depending on mode)
0
= No function
1 = Insert tape
2 = Switch tape tension, arrow to the right
3 = Switch tape tension, arrow to the left
4 = Stepping motor slowly running forward
5 = Stepping motor slowly running backward
6...18 = No function
294 tF2 Functions of pushbutton B on the V810/V820 control 18 0 2 A
panels (depending on mode)
Functions of the pushbuttons as with parameter 293
295 nAm Switching of proximity switches of inputs in2, in7, in8, in9 1 0 0 A