Efka SM210A5710, Instruction Manual

Page: 39 / 48

EFKA SM210A5710 39
8.2 Technician Level
Parameter Designation Unit max min Preset Ind.
Prg.
No.
110 SSm Maximum start/stop speed of the stepping RPM 400 10 400 A
motor
111 Sn2 Maximum stepping motor speed RPM 600 10 600 A
112 n1 Fixed stepping motor speed with RPM 600 1 100 A
asynchronous operation (e. g. tape feeding)
113 n2 Fixed stepping motor speed with manual RPM 600 1 10 A
operation by means of pushbuttons A and/or B
(with insertable strip 2)
114 n3 Stepping motor speed for regulating the RPM 600 1 10 C
tape tension correction
(effective only in modes 0, 1 and 2)
120 SnS From this sewing control speed onwards RPM 9990 0 0 A
signal M9 is emitted at the stepping motor
control. No signal is emitted if the value is
0000.
130 rPd Start of meteirng device and/or expander feeding 7 1 1 A
1 = Start only by means of knee switch
2 = Start with pedal in pos. –2 or by means of knee switch
3 = Start with pedal in pos. >1 or by means of knee switch
4 = Start inserting tape with light barrier on B18 or B19
(internal light barrier) when changing from covered
è
uncovered , after having actuated pushbutton tape
cutter on input in1 (one-time function) or the knee
switch on input in2 (reproducible function).
5 = Start inserting tape with light barrier on B18 or B19
(internal light barrier) when changing from uncovered
è
covered , after having actuated pushbutton tape
cutter on input in1 (one-time function) or the knee
switch on input in2 (reproducible function).
6 = Start inserting tape with external light barrier or
sensor on input in8 when changing from uncovered
è
covered , after having actuated pushbutton tape
cutter on input in1 (one-time function) or the knee
switch on input in2 (reproducible function).
7 = Start inserting tape with external light barrier or
sensor on input in8 when changing from covered
è
uncovered , after having actuated pushbutton tape
cutter on input in1 (one-time function) or the knee
switch on input in2 (reproducible function).
131 bEE End of metering device at the start of the seam / seam end 3 0 0 A
0 = Metering device by means of number of steps c3
(can be set with parameter 002)
1 = Metering device limited by sensor on input in5
2 = Metering device limited by sensor on input in5
+ run-out stitches c3 backward (can be set with para-
meter 002)
3 = Metering device limited by sensor on input in5
+ run-out stitches c3 forward (can be set with para-
meter 002)
132 Flo The following functions are possible by setting 1 0 1 A
parameter 290:
0 =
Modes 0, 1, 2, 3, 6, 7, 8 and 9:
Do not lift sewing foot when feeding the tape.
Mode 5:
No reaction to d.c. drive seam end.
1 = Modes 0, 1, 2, 3, 6, 7, 8 and 9:
Lift sewing foot when feeding the tape.
Mode 5:
Upon initiation of the d.c. drive seam end the
stepping motor starts adjusting the reference point
and performs the function according to the setting
of parameter 153. The function is parallel to
input in7.