39
Installation and Service Guide: Color Controller E-85A
Using the E-85A
6
If you printed the Test Page, examine the quality of the page.
If the Test Page prints, you know the E-85A is functional and the connection between the E-85A and the printer is
working. If the Test Page fails to print, look up printing problems in the Troubleshooting table on
.
When you examine the Test Page, keep in mind the following:
•
All color patches should be visible, even though they may be very faint in the 5% and 2% range.
•
Each color’s patch set should show uniform gradation from patch to patch as the color lightens from 100% to 0%.
Poor image or color quality may indicate a need to calibrate the system or service the printer. Information on the Test
Page includes the date and time of the last calibration, so the Test Page can be kept for future reference. For more
information, look up printing problems in
“Table 6: E-85A error messages and conditions”
on page 113, or see
Color
Printing
on the User Documentation CD.
Network status LEDs
Two LEDs next to the network connector indicate the network link status and speed. For additional information about
network setup, see
Configuration Guide
, which is part of the user documentation set.
Figure 18:
Ethernet network port (upper RJ-45)
Table 1:
Network link indicators
Table 2:
Network speed indicators
1
LINK/ACTIVITY
2
SPEED
LINK/ACTIVITY LED
Network link status
Off
No link to network
Solid green
Valid link to network
Flashing green
Data transfer is in progress
SPEED LED
Network speed
Off
10 Megabits/second
Solid green
100 Megabits/second
Solid amber
1000 Megabits/second
1
2
