104
Installation and Service Guide: Color Controller E-85A
Installing System Software
•
If the network cable and printer interface cables are still connected to the E-85A, disconnect the cables and perform the
installation again, starting from
“Installing or upgrading the system and user software with Fiery System installer”
If you cannot correct the error, contact your authorized service/support center. A log or error message may help to solve the
problem. Provide as much specific information as possible.
Installing software patches
As part of reinstalling system software, you must reinstall software patches. For a list of patches that were installed on the
E-85A, see the Server Configuration page that you printed before reinstalling. You may also need to reinstall software
patches as part of upgrading system software.
To download software patches
1
Start WebTools and connect to the E-85A.
2
On the WebTools Home page, click the
Check for Product Updates
.
Important:
If you upgraded system software, do not assume that the software patches listed on the Server
Configuration page are required for the upgrade. You must contact your authorized service/support center for a list of
required software patches. If you install a software patch that is not required for an upgrade, the system may be
corrupted.
