43
Installation and Service Guide: Color Controller E-85A
Using the E-85A
3
From the
Home
screen of the printer touch panel, select
EFI Fiery
. If the
EFI Fiery
icon does not display, move to the
other screen by swiping the screen until the
EFI Fiery
icon appears.
If the system has just finished processing, wait at least five seconds after the system reaches Idle before beginning the
shutdown procedure.
Note:
Notify the network administrator before you remove the E-85A from the network.
4
Press the
Fiery
tab.
5
Press
Restart Fiery
.
6
At the next screen, select one of the following options:
•
Restart Fiery Service (soft reset)—
Resets the E-85A server software but does not reboot the entire system. Network
access to the E-85A is temporarily interrupted and all currently processing jobs are aborted and may be lost. If you
choose this option, you may need to wait 1 minute or more for the server software to reset.
•
Reboot System (hard reset)—
Shuts down all E-85A activity properly and then reboots. Network access to the E-85A is
temporarily interrupted and all currently processing jobs are aborted and may be lost.
•
Shut Down—
Shuts down all E-85A server software and powers off the system. You should always select this option
when you want to power off the system. Network access to the E-85A is terminated and all currently processing jobs
are aborted and may be lost.
Note:
Use the reset button on the front of the E-85A only if the system is unresponsive to keyboard or mouse actions.
7
Press
OK
.
