Servicing the System with Furniture
This chapter describes how to remove the E-85A from the furniture to access internal components for service.
For the assembly instruction on the Fiery NX Station, see the documentation provided with Fiery NX Station kit.
Procedures
If the E-85A is installed in the optional furniture, you need to remove it from the furniture before performing most service
procedures.
Figure 45:
E-85A installed on the furniture
To remove the E-85A from the furniture
1
Make sure the E-85A is powered off and all the cables are removed from the back of the E-85A.
To avoid injury, do not lift the E-85A without assistance. The E-85A weighs approximately 22kg. At least two
persons are required to move the device.
