24
Installation and Service Guide: Color Controller E-85A
Installing hardware
Starting the E-85A for the first time
This section describes how to start the E-85A for the first time after connecting the cables.
To start the E-85A
1
Make sure that the power switch on the back of the E-85A is in the ON (|) position.
Figure 7:
E-85A power switch
2
Power on the E-85A using the power button (
) on the front panel.
Press once and release the button to power on the system. The power supply automatically senses the correct voltage.
Figure 8:
E-85A power button
3
Check the activities on the Fiery QuickTouch.
The power supply automatically senses the correct voltage. Allow startup to proceed without interruption. Do not press
any buttons while the system is starting.
1
Power switch
1
Power button
1
1
