15
Installation and Service Guide: Color Controller E-85A
Installing hardware
6
Locate the EFI/Fiery decal in the shipping container and affix it to the printer as shown.
7
Complete the installation (see
Remind site administrator to install current user software on client computers that print to the E-85A (see
Printing
and
Utilities
, which are part of the user documentation set).
To change the E-85A language
1
Access Configure (see
).
2
In Configure, click
Fiery Server
>
Regional Settings
,
3
In the Server Language drop-down list, select a language.
4
Click
Save
.
5
Click
Continue
, then click
Reboot
.
Wait until the E-85A reboots and becomes Idle. It may take up to 15 minutes to complete the system language change.
Checking the customer site
Before you install the E-85A, check site conditions and inform the customer of any installation requirements.
To check the customer site
•
Is the printer configured for use with the E-85A?
For correct settings, see the documentation that accompanies the printer.
1
EFI/Fiery decal
1
