30
Installation and Service Guide: Color Controller E-85A
Using the E-85A
To print E-85A pages
1
At Fiery Ticker screen, click “
>>
” icon on the upper left corner, and choose
Print Pages
.
The Print Pages sub-menu displays the list of available E-85A pages.
2
Choose the page that you want to print from the sub-menu.
The E-85A sends the selected page to the printer.
3
If you printed the E-85A Test Page, examine the quality of the Test Page from the printer.
If the Test Page prints, you know the E-85A is functional and the connection between the E-85A and the printer is
working. If the Test Page fails to print, look up printing problems in
“Table 6: E-85A error messages and conditions”
When you examine the Test Page, keep in mind the following:
•
All color patches should be visible, even though they may be very faint in the 5% and 2% range.
•
Each color’s patch set should show uniform gradation from patch to patch as the color lightens from 100% to 0%.
Poor image or color quality may indicate a need to calibrate the system or service the printer. Information on the Test
Page includes the date and time of the last calibration so the Test Page can be kept for future reference. For more
information, look up printing problems in
“Table 6: E-85A error messages and conditions”
on page 113, or see
Color
Printing
, which is part of the user documentation set.
Command WorkStation
As an E-85A service technician, you will typically log on to the system as Administrator. For more information about using
Command WorkStation, see
Command WorkStation Help
.
About Configure
You can access Configure from Command WorkStation or WebTools. For information about using Configure, see the
Command WorkStation Help.
To access Configure from an Internet browser
1
Open an Internet browser and type the IP address of the E-85A.
2
In WebTools, click
Configure
icon on the left.
3
Log on with Administrator privileges.
To access Configure from Command WorkStation
1
In Command WorkStation, as Administrator, do one of the following:
•
In the
Server
menu, click
Configure
.
•
From the
SERVERS
list, right-click the E-85A and select
Configure
.
•
In
Device Center
, on the
General
, click
Configure
button in lower right corner.
