61
Installation and Service Guide Color Controller E-46A
Replacing parts
This section also includes information about the following:
•
Replacing or adding DIMMs
•
Replacing the CPU
•
Replacing the battery
•
Jumper configurations
Figure 33:
Motherboard
Follow standard ESD and other safety precautions when handling components (see
).
During service to the motherboard, avoid using excessive force and always place the motherboard
on a grounded, non-metallic, static-free surface. Never allow any metal to touch the solder contacts
on the underside of the motherboard, especially beneath the battery socket. Improper handling can
short-circuit and permanently damage the motherboard.
1
Type A USB 2.0 ports and
network port
6
CPU cooling assembly
11
CPU fan power (CPU FAN,
J16)
16
SATA 0, DVD drive data
cable connector (J50)
2
Monitor port (DisplayPort)
7
Printer interface board
(PCIE_X16_SLOT)
12
Rear fan (FRONT FAN, J20)
17
SATA 1, Hard disk drive
data cable connector (J41)
3
Monitor port (DVI)
8
Battery (CR1)
13
24-pin power connector
(J18)
18
Clear CMOS Jumper (J101)
1
4
8
2
7
3
5
10
6
MH
MH
MH
MH
MH
MH
MH
MH
11
13
14
15
16
17
18
12
MH
9
