39
Installation and Service Guide: Color Controller E-46A
Using the E-46A
Scan tab
The Scan tab allows you to scan documents. Depending on the printer model, Scanning may not be supported and the
Scan tab may not appear on the Fiery QuickTouch. For more information, see
Utilities,
which is part of the user
documentation set.
Fiery tab
The Fiery tab provides access to many of the same features available through Command WorkStation.
Calibration
Calibrate the E-46A using ColorCal. For more information, see
Color Printing
.
Fiery Info
Displays information about the current configuration of the E-46A.
Printable Info
Allows you to print these system pages from the E-46A:
PS Test Page/PCL Test Page:
Confirms that the E-46A is properly connected to the
printer, and provides color and grayscale samples to troubleshoot problems with the
printer or the E-46A. Settings on the Test Page may include: Server Name, color
settings, printer model, and date and time the Test Page was printed.
PS Font List/PCL Font List:
Prints a list of all fonts currently on the E-46A hard disk
drive.
Configuration:
Provides general information about the hardware and software
configuration of the E-46A, the current settings for Setup, the current calibration, the
IP address of the E-46A, and a log of system updates.
Color Charts:
Prints samples of the RGB, CMY, and PANTONE colors available from
the E-46A.
Custom Paper Instructions:
Provides the instructions for setting up custom paper
entry.
Calibration Instructions:
Prints the information on how to perform the calibration.
Job Log:
Prints a log of the last 55 jobs.
E-mail Log:
Prints a log listing recent e-mail activity.
FTP Log:
Prints a log listing recent FTP activity.
Note:
To print the E-mail or FTP log, you must first enable the appropriate service.
Setup
Enter the Setup menu and change Setup option settings.
Clear Job Log
Clears the job log from the E-46A.
Run Diagnostics
To troubleshoot printer interface board, choose this menu
