Effekta ABADX120009XX600 Operating Manual Download

Page: 15 / 88

UPS Adira (6kVA, 6kVA XL, 10kVA,
10kVA XL 1-phase)

Safety Instructions

Adira series

2.3

Avoiding Personal Injury / Property Damage



Please read this operating manual carefully to familiarise yourself with the
device.



In particular, take note of the information regarding the installation and
commissioning of the device.



Only operate the product in an appropriate and proper way and within the
parameters stated in the technical data.



Only perform maintenance and service work that is described in the docu-
mentation. Observe the required steps. Only use original replacement parts
from

EFFEKTA Regeltechnik GmbH

2.4

Protecting the Environment



Send the product back to

EFFEKTA Regeltechnik GmbH

after the end of

its service life. We will ensure environmentally friendly disposal.

Summary of Contents for ABADX120009XX600

























































































Search results

Summary of Contents for ABADX120009XX600

Reviews:

Related manuals for ABADX120009XX600

Brands by name

Popular brands

Effekta ABADX120009XX600, Operating Manual

Search results

Summary of Contents for ABADX120009XX600

Reviews:

Related manuals for ABADX120009XX600

Brands by name

Popular brands