UPS Adira (6kVA, 6kVA XL, 10kVA,
10kVA XL 1-phase)
Operation
Adira series
53
7.2.1
Switching the UPS on / off
Turning on the UPS with connected appliances:
Before turning on the UPS, make sure all appliances are connected cor-
rectly.
Turn on the UPS.
The UPS is started up, as the fan turns on and the LCD-display shows a
welcome message. The UPS conducts a self-test.
Press the "ON / OFF" button for more than one second until an acoustic
signal sounds.
The UPS is now turned on. A few seconds later the UPS will switch to
regular operating mode and is now ready for operation.
If a fault is present at the UPS, it switches to battery mode and all outputs
are deactivated.
Turning on the UPS without connected appliances:
Check all connections before turning on the UPS.
Turn on the UPS.
The UPS is started up, as the fan turns on and the LCD-display shows a
welcome message. The UPS conducts a self-test.
Press the "ON / OFF" button for more than one second until an acoustic
signal sounds. The UPS is turned on after this procedure.
Turning-off the UPS
Push the "ON / OFF" button for more than three seconds. The system
switches into bypass mode. Disconnect the UPS from the mains input, to
switch it off completely.
