UPS Adira (6kVA, 6kVA XL, 10kVA,
10kVA XL 1-phase)
Safety Instructions
Adira series
16
2.5
Connection
The UPS is connected via the connection terminals on the back of the de-
vice. The PE (protective earth conductor) must be connected without fail.
The device may not be used without the PE under any circumstances.
Keep the cable length as short as possible.
During generator operations the pole-correct connection of the UPS must
be ensured.
For the connection of the UPS with the electricity grid, only a power cable
that is VDE-approved and labelled CE may be used.
For the connection of the appliances with the UPS only a power cable that
is VDE-approved and labelled CE may be used.
The safeguarding of any appliance must always be immediately in front of
an appliance and may never be done centrally in front of the UPS.
Never operate any household devices or tools like e. g. fan heaters, vac-
uum cleaners, electric drills, toasters, etc. with the UPS.
Do not connect any appliance to the UPS that could overload the device
(e.g. laser printer).
Keep the connecting cables as short as possible and always install them
correctly. Avoid hazards to the cable like tripping, crushing, clipping etc.
