UPS Adira (6kVA, 6kVA XL, 10kVA,
10kVA XL 1-phase)
UPS Installation and Connection
Adira series
42
into operation immediately, without charging the batteries first, however,
the backup-time may be below its regular value.
6.3
Communication port of the UPS
The UPS is equipped with a convenient communication interface to facilitate the
exchange of data with the UPS.
When connected with a USB-cable, the software can exchange data with the
UPS. The software collects detailed information about the status of the power
supply from the UPS. In the case of a supply emergency, the software ensures
that all data is saved and all appliances are shut down properly.
6.3.1
SNMP communication port
Optionally, the UPS can be equipped with a SNMP communication port.
6.4
Connection sequence
Connect the UPS with the mains power supply; both, the mains and the
UPS must be safely switched-off during this process.
Before the appliances are connected to the outlet, the basic configuration
must be completed.
Connect the appliance/s with the UPS. Make sure that all appliances are
switched-off.
